Linksys X6200 User Manual page 194

2. Click the Wi-Fi Protected Setup button on the router's Wi-Fi Protected Setup
screen, OR press and hold the Wi-Fi Protected Setup button on the back panel of
the router for one second.
3. After the client device has been configured, click OK on the router's Wi-Fi
Protected Setup screen within two minutes.
Enter Client Device PIN on Router
Use this method if your client device has a Wi-Fi Protected Setup PIN (Personal
Identification Number).
1. Enter the PIN from the client device in the field on the router's Wi-Fi Protected
Setup screen.
2. Click the Register button on the router's Wi-Fi Protected Setup screen.
3. After the client device has been configured, click OK on the router's Wi-Fi
Protected Setup screen within two minutes.
Enter Router PIN on Client Device
Use this method if your client device asks for the router's PIN.
1. On the client device, enter the PIN listed on the router's Wi-Fi Protected Setup
screen. (It is also listed on the bottom of the router.)
2. After the client device has been configured, click OK on the router's Wi-Fi
Protected Setup screen within two minutes.
For each wireless network, the Network Name (SSID), Security, and Passphrase are
displayed at the bottom of the screen.
Note--If you have client devices that do not support Wi-Fi Protected Setup, note the
wireless settings, and then manually configure those client devices.
Wireless > Guest Access
The Guest Access feature allows you to provide guests visiting your home with Internet
access via wireless. The guest network is a wireless network separate from your local
network. The Guest Access feature does not provide access to the local network and its
resources, so your guests will not have access to your computers or personal data. For
example, the guest computer cannot print to a printer on the local network or copy files to
a computer on the local network. This helps minimize exposure of your local network.
Guest Access
Allow Guest Access----- -To allow Internet access through a guest network, keep the default,
Yes . Otherwise, select No.
Guest Network Name----- -The default is the name of your wireless network, followed by
''-- - guest''.
22