Linksys X6200 User Manual page 189

6. Telstra Cable—Telstra Cable is a service that generally applies to
connections in Australia.
Network Setup—The Network Setup section configures the IP settings for your local
network.
Wireless > Basic Wireless Settings
Note—To learn more about any field, click Help on the right side of the screen.
There are two ways to configure the router's wireless network(s), manual and Wi-Fi
Protected Setup.
Wi-Fi Protected Setup is a feature that makes it easy to set up your wireless network. If
you have client devices, such as wireless adapters, that support Wi- Fi Protected Setup,
then you can use Wi-Fi Protected Setup.
Manual setup
Note—After you set up the wireless network(s), set up the wireless security settings . Go
to Wireless > Basic Wireless Settings > Security Modes (p. 19).
2.4 GHz Wireless Settings
• Network Mode (In most network situations, you should leave it set to Mixed
(default).
Mixed----- -If you have Wireless-N, Wireless-G, and Wireless-B devices in your
-
network, keep the default, Mixed.
Wireless-B/G Only----- -If you have both Wireless-B and Wireless-G devices in
-
your network, select Wireless-B/G Only.
Wireless-B Only----- -If you have only Wireless-B devices, select Wireless-B
-
Only.
Wireless-G Only----- -If you have only Wireless-G devices, select Wireless-G
-
Only.
Wireless-N Only----- -If you have only Wireless-N devices, select Wireless-N
-
Only.
Disabled----- -If you have no Wireless-B, Wireless-G, and Wireless-N devices in
-
your network, select Disabled.
Note—If you are not sure which mode to use, keep the default, Mixed.
17