Quick Reference; Warranty Coverage - Firstech 2W902R-SP User Manual

Introduction
Thank you for purchasing a Firstech system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you thoroughly
review the following manual. Please note that this manual applies to the 2 Way 5 Button LED Remote (2W902R-SP) Regardless of whether you
purchased the ALARM IT, START IT, or MAX IT system. This manual also supports the 1WG7R-SP that is included in your new RF Kit. Please note that
there are certain features listed in this manual that may not be available for your system. There may also be features listed in this manual that require
additional installation or programming before they become active. If you have any questions or concerns please contact the original place of purchase.
For further information you may also contact our customer support center at 888-820-3690.

Warranty Coverage

Caution: The Manufacturer's warranty will be voided if this product is installed by anyone other than an Authorized Firstech dealer. For complete
!
warranty details visit www.compustar.com or the last page of this manual. Firstech remotes carry a 1 year warranty from original date of purchase.
CompuStar Pro remotes carry a 2 year warranty.
Warranty registration can be completed online by visiting www.compustar.com. Please complete the registration form within 10 days of purchase. We
do not include a mail in warranty registration card with each unit - registration must be done online. To verify that an authorized dealer installed your
system, we highly recommend that you keep a copy of the original proof of purchase, such as the dealer invoice in a safe place.
By Firstech, LLC 4

Quick Reference

The 2W902R-SP comes equipped with automatic button lock. This requires you to tap any button to wake your remote up then tap the button for the
function you are trying to activate. Button lock can be turned off in your remote's option menu.
The 2W902R-SP is shipped in Half Paging Mode. This means that the remote will only receive 2 Way LED confirmations for remote start and lock and
unlock. It will not receive 2 Way LED confirmations when the alarm is triggered. To turn this feature on hold the
enter the Remote Programming Menu. Tap the Lock button to turn Full Paging on. The remote will beep twice and LED flash red. You are now in
Full Alarm and Starter Mode.
When servicing or loaning your vehicle to others, the system should be placed in Valet Mode. Valet Mode prevents the system from remote starting and
disables all alarm functions.
IMPORTANT: While in Valet mode the remote will still control power lock and unlock systems. The parking lights will not flash.
The system can be put into valet one of three ways:
1. Turn the vehicle's key to the ignition "on" position, tap the Function and Trunk buttons
lights will flash once and/or siren chirp once to confirm the system is in valet mode. Repeat this process to take the system out of valet mode. The
parking lights will flash twice and/or siren chirp once to confirm the system is out of valet mode. Please note the confirmation chirps from the 2 Way
remote will be quieter in Valet Mode.
buttons for 2.5 seconds to
at the same time for a half second. The parking
5 By Firstech, LLC