Quick Reference; Warranty Coverage - Firstech FTX2400R-SS User Manual

Introduction
Thank you for purchasing a Firstech system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you thoroughly review the
following manual. Please note that this manual applies to the FTX2400R-SS Remotes. It is not compatible with ALARM IT or MAX IT systems. This manual also
supports the 1 Way remote that is included in your new RF Kit. Please note that there are certain features listed in this manual that may not be available for your
system. There may also be features listed in this manual that require additional installation or programming before they become active.
If you have any questions, please contact the original place of purchase. For further information you may also contact our customer support center by calling
888-820-3690.

Warranty Coverage

! Caution: The Manufacturer's warranty will be voided if this product is installed by anyone other than an Authorized Firstech dealer. For complete warranty
details visit www.compustar.com or the last page of this manual. Firstech remotes carry a 1 year warranty from original date of purchase. CompuStar Pro
remotes carry a 2 year warranty.
Warranty registration can be completed online by visiting www.compustar.com. Please complete the registration form within 10 days of purchase. We do not
include a mail in warranty registration card with each unit - registration must be done online. To verify that an authorized dealer installed your system, we highly
recommend that you keep a copy of the original proof of purchase, such as the dealer invoice in a safe place.
By Firstech, LLC 4

Quick Reference

When servicing or loaning your vehicle to others, the system should be placed in Valet Mode. Valet Mode prevents the system from remote starting and disables
all alarm functions.
IMPORTANT: While in Valet mode the remote will still control power lock and unlock systems. The parking lights will not flash. Also the co nfirmation chirps
from the 2 Way remote will be shorter.
The system can be put into valet one of three ways:
1. Turn the vehicle s key to the ignition on position and tap buttons
once and/or siren chirp once to confirm the system is in valet mode. Repeat this process to take the system out of valet mode. The parking lights
will flash twice and/or siren chirp once to confirm the system is out of valet mode.
2. If you do not have your remote control, you can put the system into valet by turning the ignition key on and then off five times within 7 seconds. The parking
lights will flash once to confirm the system is in valet mode. Shortly after the first flash, the parking lights will flash twice. A remote control is required to take the
system out of valet mode.
IMPORTANT: If your system is set up for a secure valet option, you will not be able to put the system into valet until the proper code has been entered to the secure valet switch.
3. If your system is set up for the secure valet option (optional), you will not be able to put the system into valet until the proper code has been entered to the
secure valet switch. The secure valet switch is the small button with bright blue LED on the front and if installed is the only way to override the alarm and/or
remote start. Until programmed, the default code is (3, 3).
Removing System Out of Valet:
Tap the for a half second to remove the system out of Valet. On starter and alarm/starter systems, you can turn the key to the Ignition On position
and tap the foot brake 10 times. This will take your system out of Valet Mode. If this does not work you can also reprogram your remote(s). See Remote
Coding/Programming Routine section for details.
simultaneously for a half second. The parking lights will flash
5 By Firstech, LLC