Firstech 2W902R-SP User Manual page 5

Quick Reference
Button(s) Duration Function
Half second Turns siren chirps on/off (Note: With the siren chirps off, it will still sound in the event the alarm is triggered).
2.5 seconds Turns the shock sensor on/off. (ALARM IT or MAX IT systems only)
Half second Valet mode (see Valet Mode Section for details)
2.5 seconds Option programming menu 1. For use during installation.
Activates timer start mode. Timer start mode has multiple programmable settings: duration settings,
Half second
temperature settings and self start settings.
2.5 seconds Option programming menu 2. For use during installation.
Half second Activates passive arming (vehicle will arm/lock 30 seconds after the vehicle is disarmed)
2.5 seconds Accesses Remote Option Menu. See Remote Option Menu Table for details.
By Firstech, LLC 8
Quick Reference
Button Duration
One Tap Drive Lock On/Off
Feature Turns Feature Button Remote Function / Description
On or Off Duration Chirp(s)
Enter and Exit 2.5 Three On |
Enters and Exits Remote Option Menu. The LED will flash purple.
Seconds
Remote Menu
Three Off
Determines whether your remote is used for Alarm or Start Only system. Set it to FULL
One-Half for ALARM IT and MAX IT features. Set to HALF for START IT ONLY systems. If on,
2 Way Paging
Half
LED will flash blue. When turned off, the LED will flash red twice.
Paging | Two-
Display second
Full Paging Important: The 2W902R-SP is defaulted in HALF for START IT systems. It must be
changed to FULL for alarm systems.
Half One On | Turns the silent mode on or off. If on, LED will flash blue. When turned off, the LED will
Silent
Two Off
second
flash red twice.
One On | Puts your remote into 2nd Car Mode. You can control another vehicle with the same remote as long as
Half
2nd Car Mode
it has the same RF Kit installed. If on, LED will flash blue. When turned off, the LED will flash red twice.
second
Two Off
One On | Locks all buttons on the remote automatically after one minute. Tap any button then the
Automatic
Half
button(s) you would like to use to send a command from the remote to your vehicle. If on,
Two Off
second
Button Lock
LED will flash blue. When turned off, the LED will flash red twice.
Turbo Timer On/Off Auxiliary 1 Auxiliary 2
9 By Firstech, LLC