Zipper Application - ELNA eXplore 320 Instruction Manual

Zipper Application

Machine setting
Stitch:
Stitch width:
Stitch length:
Thread tension: 3 – 6
Presser foot:
Attaching the zipper foot
A: To sew the left side of the zipper, attach zipper foot
with the right side pin.
B: To sew the right side of zipper, attach the zipper foot
with the left side pin.
Groove
Pin
Fabric preparation
Add 3/8" (1 cm) to the zipper length. This is the
1
overall opening size.
Right side of the fabric
3/8" (1 cm)
Opening size
Zipper length
Slider
Zipper teeth
Zipper tape
Wrong side of the fabric
Bottom stop position
Place the right (top) sides of the fabric together. Sew
2
a bottom seam up to the bottom stop position leaving
a 5/8" (2 cm) allowance. Sew a few stitches in
reverse to lock.
Increase the stitch length to "4", set needle thread
tension to "1", and baste the entire length of the
fabric.
5/8" (2 cm)
Basting
11
Reverse stitch
12
13
Bottom stop position
13
Bottom seam
14
68
1
5 (center needle poston)
1.5 – 4
E