As the applet loads, the user will be prompted to enter a password. The default password is
paradise (see Figure 3-17), but the user may assign a new password using the web M&C or
Paradise Datacom's Universal M&C Software. See Section
Universal M&C Software.
3.4.1 Navigating the Web M&C
The SSPA Monitor and Control is performed via following the links on the web page. These
links include Status and Faults, Communications Settings, General Settings and Fault
Settings.
• Status and Faults Window: A view of critical SSPA operational parameters. See
Figure 3-18 for descriptions of some of the functions available in this window.
Indicators for
Connection, Mute
and Online states
and Summary
Alarm.
Displays
Attenuation and
Temperature
values.
Green indicates
no Faults;
Red indicates a
fault exists
Operations Manual, HPA3, Mini Compact Outdoor SSPA
Figure 3-17: Enter password (default is "paradise")
Figure 3-18: Status and Faults window descriptions
208143 REV -
for details on using the
3.3
Upper section is
common to all
windows; displays
Model Number,
Serial Number,
Firmware version,
and IP, MAC and
Network addresses
Displays various
voltages, current
draw, Output
Power and BUC
reference source.
37