Section 2: Installation; Introduction; Dimensions And Weight; Figure 2-1: Outline Drawing, Ku-Band Mini Compact Outdoor Sspa - Paradise Datacom RA 5785 Operation Manual

Mini compact outdoor solid state power amplifier
Table of Contents

Advertisement

2.0 Introduction

This section provides a physical description of the Mini Compact Outdoor, including pin-outs
of all connectors, power requirements for the installed unit, and instructions on single-unit
boom mounting.

2.1 Dimensions and Weight

The Mini Compact Outdoor SSPA enclosure dimensions are 9.00 in. W x 12.00 in. L x 8.00 in.
H. The addition of the RF Output waveguide and I/O connectors add a few inches to the over-
all length of the unit, but the width and height remain constant, independent of the frequency
band of the unit. See Figure 2-1 for an outline drawing of a Ku-Band Mini Compact Outdoor
SSPA.
M & C
SSPA
STATUS
J4
LINK
J5

Figure 2-1: Outline Drawing, Ku-Band Mini Compact Outdoor SSPA

The base unit weighs approximately 24.5 lbs. There are several options available for the Mini
Compact Outdoor SSPA that will add to the base weight. These are listed in Table 2-1, along
with the approximate weights for each power level.
Operations Manual, HPA3, Mini Compact Outdoor SSPA
RF IN
J1
SWITCH
J6
MODEL: XXXXXXXXXXXX
S/N: XXXX
P/N: LXXXXXX-X
208143 REV -

Section 2: Installation

RF OUT
J2
13

Advertisement

Table of Contents
loading

Table of Contents