ParaBody Leg Press Factor 625 Assembling Instructions page 4

~tinue to route Leg Press cable as shown.
,. ,~emave the boll used to hold the la~ boom 1o
~'he tube an the rear of" lhe Main Frame and
~aih one I1) 4~.,~" w/l" Clevis Pulley and
one (1) cable retaining clip using one (t)
~-~" x 4(.'~'" bolt and the existing 34" Locknu~
and 34" Washer supplied. Raule cable as
shown. Locme ~able retaining clip
approxim~ety as shown.
CA.BL~ RETAINING CLIP
LEG PRESS CA,BLE
(PB3626-01)
,4: 2" w/1 " CLL-VIS
PULLEY- 2 PL
.. Remove the bolt used to hold the pulley in the
!m boom (pulley to rear of D-Ring} and attach
one (1) 4!.~" w/l" Clevis Pulley and one (1)
cable retaining clip using one (I) 3/if' x 4V~"
Ba]t and existing :ks" Lockwasher.
~ "antinue to route the cable dawn and under
e left pulley shown in Figure 1.
iO~ Position both cable retaining clips as shown.
Make sure cable does hal rub on cable
retaining clips after cable is completely
routed.
LEG PRESS CABLE '
!
(PB3236-01)
L
LAT BOOM
CABLE RETAINING CLIP
D-RING
)TL See PBF604 Optional Shroud Kit for optional
shroud ~sembly.
Secure leg press Shroud as shown in Figure 4.
~G PRESS SHROUD