Notes On Handling; Notes On Discarding - Yamaha ttr230 Service Manual

REAR SHOCK ABSORBER AND BALANCE

NOTES ON HANDLING

V V V V V WARNING
•This shock absorber contains nitrogen gas
at high pressure. Read and understand the
following information before handling. The
manufacturer assumes no liability for injuri-
es or damage resulting from mishandling.
•Do not try to pierce or open the shock
absorber assembly.
•Do not subject the shock absorber to flames
or other high temperature sources, since this
may result in explosion of the unit due to
excessive gas pressure.
•Do not deform or damage the cylinder in
any way. Damage to the cylinder will result
in poor performance of the shock absorber.
•When discarding the shock absorber, ob-
serve the following instructions in Section

"NOTES ON DISCARDING."

NOTES ON DISCARDING
*************************************
Shock absorber discarding steps:
• Before discarding the shock absorber,
exhaust the nitrogen. Drill a 2 ~ 3 mm
hole on the gas chamber at 15 ~20 mm
from the gas chamber end.
V V V V V WARNING
Use goggles in order to protect the eyes
against the gas and drilling chips.
*************************************
6-55
FRAME