Location Of Controls - Orion TV32LB2000(H) Operating Instructions Manual

Location of controls

9 (TV32...) 9 (TV42.../TV46...)
Description of Indicators and Controls
1. Loudspeakers
2. (Standby/On) indicator: The LED indicator lights up red in standby mode, and blue in the power
ON mode.
3. Remote sensor
4. (Power)-key: Enter standby mode or turn on the power. Preparation: Connect power-cable to
AC220~240V/50Hz. Then turn on mains switch (9).
5. INPUT/ENTER button: Select input mode for TV/AV/COMPONENT/HDMI/PC. In Menu : Using as
ENTER button.
6. MENU button: To display the menu screen.
7. P (Channel) +/–/▲/▼ buttons: Press + to change to a higher numbered channel set into memory.
Press – to change to a lower numbered channel set into memory. In Menu: Setting.
8. (Volume) +/–/◀/▶ buttons / In Menu: Setting.
9. Mains switch: Switch on/off power supply completely.
For complete disconnection from the mains power supply, remove the supplied power cable from the
socket.
To adjust the TV angle (TV42.../TV46...) :
You can adjust the TV angle of the TV-screen for 30° from horizontal angle. Hold the base of the TV while
adjusting the angle.
3DH0114B_EN.indd 7 3DH0114B_EN.indd 7
2
1 3
8 7 6 5 4
7
5/12/11 9:45:45 AM 5/12/11 9:45:45 AM