Connection To Other Equipment - Orion TV32LB2000(H) Operating Instructions Manual

Connection to other equipment

1. Connecting to other equipment
Attention: Preparation:
• Disconnect all equipment from the AC-supply, to prevent any possible damage.
• Make the necessary connections.
• Make sure all connections are safe & secure before reconnecting your equipment the AC-supply.
Note:
• Select an appropriate external input mode. (See page 12).
Please connect your satellite-receiver or DVD player via SCART. Make sure your SCART cable's cross-
section is at least 1 cm or more. SCART cables with less thickness may cause visible noise.
Please make the following settings inside your receiver's / DVD-player's setup-menu:
Video signal: RGB
TV-Format: 16:9
If you miss to make these settings properly, picture quality will be inferior and parts of the picture
might be missing. This is not a fault of this TV-set.
In case you need help to make this adjustment with your satellite-receiver / DVD-player, please consult
the related instructions or contact the supplier or maker of those apparatus for support.
Please use the satellite's remote-control handset to select Teletext or desired TV-station. Generally it is
not possible to store satellite TV-stations into a standard TV.
If the TV does not automatically switch to SCART1, please select INPUT SCART1 manually, as seen on
page 12.
Satellite antenna
3DH0114B_EN.indd 25 3DH0114B_EN.indd 25
Video recorder
Satellite
receiver
VCR TV
TV
(All illustrated SCART cables and
antenna cables are not supplied)
25
5/12/11 9:45:57 AM 5/12/11 9:45:57 AM