Auto Setup - Orion TV32LB2000(H) Operating Instructions Manual

Auto setup

The built-in tuner receives DVB-C, DVB-T and Cable-
analogue. At the first time you operate after the
purchase, "First time installation" menu will appear.
Preparation:
Turn on TV-unit (see P.7) and connect antenna.
1
First time installation menu will appear.
Press or to select desired language.
Then press ENTER
First time installation
Welcome please select your language!
Bienvenue ! Veuillez choisir une langue.
Willkommen! Bitte wählen Sie Ihre Sprache.
Benvenuti. Selezionare la lingua.
Bienvenido, seleccione un idioma
Hoş geldiniz, lütfen dilinizi seçin!
Vitajte, vyberte prosím svoj jazyk!
Välkommen, välj ditt språk!
Bem-vindo, escolha o seu idioma!
Tervetuloa! Valitse kielesi.
Velkommen! Vennligst velg ønsket språk!
Vítejte! Vyberte jazyk!
2
W bi ój j k!
Press ◀ or ▶ to select your country. Then press
▼ and select Scan Encrypted setting with ◀ or
▶. Then press ENTER
First time installation
Country
Scan Encrypted
3
Press or to select Home.
Then press ENTER
First time installation
Please select where the TV will be placed.
The picture will be optimised for the location.
4
If you cancel Auto Power Off (see page 21),
press or to select Off. Then press ENTER
First time installation
Your TV has been set to power off
after 4 hours of continuous viewing
If you want to change this settings, please choose Off.
This settings can also be changed in the MENU.
3DH0114B_EN.indd 11 3DH0114B_EN.indd 11
.
Language Setting
English
Français
Deutsch
Italiano
Español
Türkçe
Slovenčina
Svenska
Português
Suomi
Norsk
Česky
P l ki
.
Welcome!
UK
< >
Yes
.
TV Location
Home
Store
Auto Power Off
On
Off
5
TV will search for Digital cable TV-channels at
first. Connect your DVB-C antenna now.
Select "Yes" and press ENTER to start an
automatic DVBC channel scan.
The tuning's progress will be displayed for
confirmation.
Do you want to start an automatic DVBC
channel scan?
Yes No
Note:
• Please be patient - the Auto Tuning process
can take several minutes to complete.
6
When the tuning for Digital cable TV-channels
is completed, you will be asked if you want to
proceed to autotuning for Digital TV-channels. If
you wish to start autotune Digital TV-channels,
connect your DVB-T antenna. Then Select "Yes"
and press ENTER.
Do you want to start an automatic DVBT
channel scan?
Yes No
7
When the tuning for Digital TV-channels is
completed, you will be asked if you want
to proceed to autotuning for Analog TV-
channels. If you wish to start autotune Analog
TV-channels, connect your Analog cable-TV
antenna. Then select "Yes" and press ENTER.
Do you want to start an automatic Analog
channel scan?
Yes No
.
8
When the tuning is completed, Edit Channel
List will appear. Then press MENU to watch a
normal TV-screen.
Note:
• To cancel the auto tuning, press RETURN during
the process.
• You would like to repeat First time installation?
So, you proceed:
1. Press MENU.
2. Select "Installation". Press ENTER.
3. Select "Reset TV Setting". Press ENTER.
4. Select "Yes". Press ENTER.
The TV-unit will turn off.
Now, you can start from the beginning.
11
5/12/11 9:45:52 AM 5/12/11 9:45:52 AM