Other Convenience Functions - Orion TV32LB2000(H) Operating Instructions Manual

Other convenience functions

Picture
Mode
Contrast / Brightness / Sharpness / Colour
Colour Temp
(available only when you selected the Mode except
"Cinema")
Noise Reduction
Film Mode
FAROUDJA
(available only when you selected "Cinema" at Mode)
PC Position
Reset
Sound
Equalizer
Balance
Headphone
Sound Mode
Surround
Loudness
Reset
3DH0114B_EN.indd 19 3DH0114B_EN.indd 19
Selected Items
Natural
Cinema
Dynamic
Off / Low / Medium / High
On / Off
Active Contrast
Off/Low/Medium/High
Active Color 3D
Off/Low/Medium/High
Mpeg Noise Reduction
Off/Low/Medium/High
WB-Red / -Green / -Blue Gain
WB-Red / -Green / -Blue Bias
WB-Reset
Autoposition
H Position (1360x768 /
1280x1024)
V Position
Dot Clock
Phase
Music / Movie / Speech / Flat / Classic
/ User
100 ~ 10,000Hz
(available only when you selected
" User " .)
Volume / Balance / Bass / Treble
Mono / Stereo / Dual I / Dual II
On / Off
On / Off
Setup hint
Recommended for viewing under normal ambient room
lighting conditions.
Recommended for watching movies in a darkened room
producing a cinema-like picture.
Provides enhanced picture contrast and sharpness when
viewing in a bright room.
You can adjust the picture to your preference.
Cool (Bluish) / Normal (Neutral) / Warm (Reddish)
To set the level of decreasing noises included in the video
signal.
You can set the TV to automatically detects the movie film
material and faithfully reproduces the original film image.
(Not available if Motion 100Hz is on (Low/Medium/High))
This function dynamically enhances contrast by analyzing
the several previous frames of input image.
This item is to change the performance of advanced color
management feature. The gain and offset of hue, saturation
and luminance is adjusted by this feature.
This setting is the level of decreasing noises with preventing
degradation of image quality.
To set manually the gain of R/G/B signal in video.
To set manually the bias of R/G/B signal in video.
To reset the setting in FAROUDJA.
Automatic adjustment of VGA for optimal picture.
To adjust the horizontal placing of the image.
To adjust the vertical placing of the image.
Eliminates the vertical (CLOCK) interfering lines.
Eliminates the horizontal (PHASE) interfering lines.
Select "Reset" to reset Picture options (except "Mode") to
the factory preset values.
You can choose a basic equalizer mode. Depending on this
setting, the following detail setting is set to default value of
each mode.
The setting of this item adjusts the audio level of its
frequency corresponding to each setting.
You can adjust the Balance.
You can adjust the sound of headphone.
To change which of the left or right in the audio stream is
output.
To activate surround sound when receiving stereo
signals.
This will automatically adjust volume.
Select "Reset" to reset Sound options to the factory preset
values.
19
5/12/11 9:45:55 AM 5/12/11 9:45:55 AM