Regency FP90 Owners & Installation Manual page 18

installation
|
18
4 SCREWS
Majestic SK8 Chimney System
SECURITY FTF8 STARTER
4 SCREWS
Security FTF8 Chimney System
3) Place the fi rst section of fl ue pipe into the fl ue adapter collar.
Make sure the pipe is seated properly inside the adapter
collar and use three (3) #8 self-drilling screws to fasten the
pipe to the collar. (Screws provided).
USE 3 SCREWS
18 | FP90 Wood Fireplace
Majestic SK8 Chimney System
918-439a
WOOD FIREPLACE
FLUE COLLAR
FLUE COLLAR
FIRST INNER
FLUE SECTION
(FITS INSIDE (FITS INSIDE (FITS INSIDE
ADAPTER COLLAR) ADAPTER COLLAR)
FLUE COLLAR
PAGE 2 OF 3
NOTE: For Majestic Flue Pipe, it is recommended that
the locking tabs be fl attened with pliers to improve
the fi t into the adapter.
SECURITY SECURITY
USE 3 SCREWS
FTF8 FLUE FTF8 FLUE
SECURITY SECURITY
FTF8 STARTER FTF8 STARTER
Security FTF8 Chimney System
4) Install the outer chimney adapter onto the top of the fi replace.
Slide it down over the fl ue pipe and center the chimney
adapter relative to the inner fl ue adapter. Use four (4) #8
self-drilling screws to anchor the plate securely to the top
of the unit. Self-drilling screws can also be used to avoid
drilling pilot holes. (Screws provided).
FIRST INNER
FLUE SECTION
(FITS INSIDE
ADAPTER COLLAR)
INSTALL OUTER CHIMNEY ADAPTER
CENTERED AROUND FLUE AND FASTEN
TO THE TOP OF THE UNIT (4 SCREWS).
NEXT ATTACH THE OUTER CHIMNEY
AND FASTEN TO OUTER ADAPTER COLLAR.
FP90
09/19/05