Table of Contents
Advertisement
Rack and Hard Drive Installation
Instructions
Installing Hard Drives
Removing Hard Drive Trays from the Chassis
FortiAnalyzer-4000B Version 4.0 MR2 Rack and Hardware Install Guide
05-420-126194-20100608
http://docs.fortinet.com/
•
Feedback
The FortiAnalyzer-4000B comes with a sliding rail kit. Use the instructions below to install
the rails.
Caution: Only trained service technicians are authorized to remove the system cover and
access any of the components inside the system. Before you begin, review the safety
instructions that came with the system.
To remove a hard drive tray from the chassis
1 Press the release button on the drive tray. This extends the drive bay handle.
2 Use the handle to pull the drive out of the chassis.
Figure 1: Removing the hard drive.
2
The drives are mounted in drive trays to simplify their installation and removal from the
chassis. These trays also help promote proper airflow for the drive bays.
1
5
Advertisement
Table of Contents
