Advertisement
Rack Installation
1. Press the trigger down to unlock and pull out the inner chassis rail
Pull chassis (inner)
member out
2. Mount and slide the inner chassis rail using the studs on side of the
appliance
3. Press down the inner rail trigger to re-insert the inner rail and push inwards
until the safety locks into position
4. Repeat the steps for the other rail
6
5. Release the safety lock, then mount the rails onto the rack
Press the trigger
down to release
6. Extend each rail assembly, then push the trigger down and slide the
appliance rails into the rack mounted rail assembly
Release safety lock
before mounting
Push the safety lock forward to secure
Retainer is in fully open position
Press trigger down to unlock slides
7
Advertisement
