Fisher & Paykel AquaSmart 2 Installation Instructions And User Manual page 21

Easy touch buttons and LCD screen
These buttons require only a gentle touch to activate.
Touch POWER to activate your AquaSmart 2™ washer.
1
HIGH EFFICIENCY – this light tells you when 'High Efficiency' mode is selected. The button allows
2
you to switch between High Efficiency and Conventional modes (refer to page 20).
The screen in the middle of the panel will display the wash cycles available (refer to page 22).
3
Use the SCROLL buttons to select the wash cycle that best suits your load (refer to page 22).
4
Use the SELECT/TICK button to confirm your selection.
5
Choose your wash options. For example, if you wish to use fabric softener, ensure the SOFTENER
6
option is ON (if not, scroll to SOFTENER and touch the SELECT button. Select SOFTENER ON). The
SOFTENER option is a good idea when washing dark coloured items which are particularly soiled.
Note: you do not need to add fabric softener to the dispenser in this instance. For more information
on wash options refer to pages 23 – 26.
Touch START – Let AquaSmart 2™ do the rest for you. The washer will start to fill with water,
6
and will automatically select the correct water level and wash action for your load. Constant
interruptions to the cycle will increase the time taken to complete the cycle and may result in
poorer wash performance.
For best fabric and colour care, remove your clothes as soon as the cycle has finished.
Important!
Failure to follow the advice in this guide may result in damage to your garments, and your
expectations of wash performance may not be met.
Getting started quickly
4 5
19