Advertisement
3/8
X
2"~
BASE
FIGURE 3
¯ SECURELY attach one 3-1/2" PULLEY (2) to the FRONT
LEG (1) using one 3/8 X 2" BOLT (14), two 3/8" WASH-
ERS (10), and one 3/8" LOCK NUT (11). See FIGURE
¯ Attach the open end of PRESS LINK CABLE (8) to the
QUICK DISCONNECT LINK (3).
See FIGURE
¯ SECURELY tighten
the QUICK DISCONNECT (3)
the tab on the FRONT LEG (1) as shwon in FIGURE
',TEP 3
¯ SECURELY
attach one 3-1/2" PULLEY (2) to the BASE using one 3/8 X 2" BOLT (14), two 3/8" WASHERS
(10), and one
LOCKNUT (11).
See FIGURE
"
TIGHTEN!
FIGURE 4
Advertisement
