Operation; Conveyance Control - Konica Minolta BIZHUB 750 Service Manual

22. REVERSE/EXIT SECTION

22.3 Operation

22.3.1

Conveyance control

A. Reverse/exit switching gate
The reverse/exit switching gate is turned ON and OFF by the reverse/exit solenoid (SD7) to switch the convey-
ance path for paper exited from the fusing exit roller over to either the straight paper exit or the reverse paper
exit.
B. Conveyance path
(1) Straight paper exit
While in the straight paper exit, the reverse/exit switching gate [2] is closed when the reverse/exit solenoid (SD7)
turns ON. So, paper exited from the fusing exit roller [1] is conveyed to the main body paper exit roller [3] pass-
ing over the reverse/exit switching gate.
[1] Fusing exit roller
[2] Reverse/exit switching gate
86
[3]
[2]
[1]
Theory of Operation Ver1.0 Aug.2005
[3] Main body paper exit roller
57aat2c074na