Table of Contents
Advertisement
INITIALIZING
You can reset the following data back to the factory
default settings.
Camera Setup
Setup Menu (PC oriented)
HTML files
I
Initializing the Camera Menu
• Move the cursor to CAMERA RESET.
• Hold down
[Left], [Right], and [SET]
neously for 2 seconds on the camera, or click the All
Reset button on your computer display.
I
Initializing the Setup Menu
• In the power-on state, press the
buttons simultaneously while holding down the but-
ton A.
Hold down the button A for 15 seconds. It will take
about 10 seconds to complete the initializing. Be
sure to continue supplying power to the camera
while initializing.
Notes:
• Clock calibration is required even after initializing
the setup menu.
• Try again if the previous initializing failed.
I
Initializing HTML Files
• In the power-on state, press the side panel buttons,
and
simultaneously while holding down
[Up]
[Down]
the button B.
Hold down the button B for 15 seconds. It will take
about 10 seconds to complete the initializing. Be
sure to continue supplying power to the camera
while initializing.
Notes:
• Never press both the buttons A and B at a time.
• Try again if the previous initializing failed.
buttons simulta-
and
[Up]
[Down]
-42-
Advertisement
Table of Contents
