Table of Contents
Advertisement
Connection type
Connection type 3
Connection type 4
Item
IP address
Subnet mask
Default gateway
Host name
Network speed
HTTP port
DHCP
DNS
Primary DNS
Secondary DNS
DDNS
Host name
User name
Password
Access interval
IP address
Net mask
Default gateway
Parameter description
Enter the IP address assigned by your Internet service provider.
The setting is not required if your Internet service provider uses a
DHCP server (the DHCP server assigns an IP address to the
camera automatically).
Enter the Net mask assigned by your Internet service provider.
The setting is not required if your Internet service provider uses a
DHCP server (the DHCP server assigns an IP address to the
camera automatically).
Enter the default gateway assigned by your Internet service
provider.
Contact your Internet service provider and enter the assigned
host name if required.
Select the network speed by pressing the [o] button.
Selectable parameters: Auto (default setting), 100 Mbps (full
duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps
(half duplex) Using Auto is recommended.
Use the default setting "80" for the HTTP port.
Click ON if your Internet service provider uses a DHCP server
(DHCP server assigns an IP address to the camera automatical-
ly).
Click ON when using the DNS server.
0, 0. 0. 0
Enter the IP address of DNS when using the DNS server.
Contact your Internet service provider for the IP address of the
DNS. Primary and secondary IP addresses can be set for the
DNS.
Click ON when using DDNS function.
Ask your administrator
Ask your administrator
Ask your administrator
Ask your administrator
The setting differs depending on the setting of the router as fol-
lows:
If the router does not use DHCP: No setting required
If the router uses DHCP: The router needs to be assigned a pri-
vate IP address. This IP address must be different from the IP
addresses already assigned to the PC and other cameras.
For further information, refer to the operating instructions of the
router.
The setting differs depending on the setting of the router as fol-
lows:
If the router uses DHCP: No setting required
If the router does not use DHCP: Setting of the net mask is
required.
For further information, refer to the operating instructions of the
router.
The setting differs depending on the setting of the router as fol-
lows:
If the router uses DHCP: No setting required
If the router does not use DHCP: The router needs to be
assigned a private IP address.
For further information, refer to the operating instructions of the
router.
-23-
Advertisement
Table of Contents
