Switching The Scart Output; Enjoying A Game Console Or Watching Camcorder Images; Connecting A Game Console Or; Camcorder - Pioneer PDP-506XDE Operating Instructions Manual

Enjoying through External Equipment
13

Switching the SCART output

Video and audio signals output from INPUT 2 and INPUT 3
sources are the same as those used for the current image
display. You can however change the setting so that DTV
signals are always output regardless of the current image
display.
1
Press HOME MENU.
2
Select "Setup" ( /
3
Select "SCART Output" ( /
4
Select a desired parameter ( /
SCART Output
Auto
Fixed on DTV
Item Description
Auto Outputs video and audio signals coming from the
selected input source.
Fixed on DTV Always output DTV signals.
5
Press HOME MENU to exit the menu.
NOTE
• The following operations are given higher priority over the
above setting:
• Presetting a DTV programme for recording
• Execution of WYSIWYR (page 62)
64
En
then ENTER).
then ENTER).
then ENTER).
Enjoying a game console or watching
camcorder images
Connecting a game console or camcorder
Use the INPUT 5 terminals to connect a game console,
camcorder and other audiovisual equipment.
Media Receiver (front view)
PHONES S-VIDEO
PC CARD EJECT
S-Video cable
(commercially available)
Displaying an image from the game console or

camcorder

To watch an image coming from the game console or
camcorder, press INPUT 5 on the remote control unit or press
INPUT on the Media Receiver to select INPUT 5.
NOTE
• The INPUT 5 terminals are checked for cable connections in
the order where; 1) S-Video, 2) Video.
• Connect external equipment to only terminals that are to be
actually used.
• The INPUT 5 AUDIO terminals are shared between the
INPUT 5 and PC input sources. When audio signals are input
to these terminals, the same signal type is selected no
matter whether you select INPUT 5 or PC.
VIDEO L AUDIO R
ANALOG RGB
PC PC
INPUT 5
Composite video cables
(commercially available)
Game console/Camcorder