Run Schedule From Slideshow; Run Schedule From Calendar/Clock Screen; Set Date And Time - Pandigital PI8004W01 User Manual

CAUTION: After you select the

Run Schedule from Slideshow

1. Start a slideshow and press
button when it appears in the lower left corner of the screen
(approx 10 sec).
2. To run the schedule when the
displayed, restart your slideshow and then press
Run Schedule
the
3. The DPF will go into stand-by mode according to the schedule,
and when it resumes operation, the slideshow will again begin
to play.
A small timer clock will appear indicating the schedule is active, and
then the DPF will operate according to the set schedule.

Run Schedule from CALENDAR/CLOCK Screen

CALENDAR/CLOCK
1. On the
Run Schedule
2. Select
3. The DPF will go into stand-by mode according to the schedule,
and when it resumes operation, the
again be displayed.
A small timer clock will appear indicating the schedule is active, and
then the DPF will operate according to the set schedule.

Set Date and Time

CALENDAR/CLOCK
1. On the
Set Date/Time
2. Select
to change the field values.
Done
3. Select
intervention will cancel the activation (i.e., pressing
remote or control button, powering off) and the schedule
will not take effect until you select this function again to
re-activate.
button when it appears.
.
, and then select the options and use
.
Run Schedule
ENTER
to select the
Run Schedule
MENU
screen, press
Calendar/Clock
MENU
screen, press
function, any user
Run Schedule
button is no longer
ENTER
to select
.
screen will
.
29