Run Schedule From Slideshow; Run Schedule From Calendar/Clock Screen; Set Date And Time; Set Alarm - Pandigital PAN7000DW User Manual

Run Schedule from Slideshow

1. Start a slideshow and press
button when it appears in the lower left corner of the screen
(approx 10 sec).
2. To run the schedule when the
displayed, restart your slideshow and then press
the
3. The DPF will go into stand-by mode according to the schedule,
and when it resumes operation, the slideshow will again begin
to play.

Run Schedule from CALENDAR/CLOCK Screen

1. On the
2. Select
3. The DPF will go into stand-by mode according to the schedule,
and when it resumes operation, the
again be displayed.
A small timer clock will appear indicating the schedule is active,
and then the DPF will operate according to the set schedule.

Set Date and Time

1. On the
2. Select
3. Select
4. Press

Set Alarm

You can use your DPF as an alarm clock when desired. You can set
the frequency of the alarm, and set the alert to sound the built-in tone
or play your music file.
1. On the
28
Run Schedule
button when it appears.
CALENDAR/CLOCK
Run Schedule
CALENDAR/CLOCK
Set Date/Time
to change the field values.
Done
.
EXIT
to return to the previous screen.
CALENDAR/CLOCK
ENTER
to select the
Run Schedule
screen, press
.
Calendar/Clock
screen, press
, and then select the options and use
screen, press
Run Schedule
button is no longer
ENTER
to select
MENU
.
screen will
MENU
.
MENU
.