Run The Schedule; Run Schedule From Slideshow; Run Schedule From Calendar/Clock Screen - Pandigital PI1003DW User Manual

3. Select
Done
4. Press
EXIT

Run the Schedule

After the schedule times have been set (per above instructions), you
will use the
Run Schedule
to take effect.
There are two methods for running the schedule, either from a
slideshow or from the
CAUTION: After you select the

Run Schedule from Slideshow

1. Start a slideshow, and then press
Schedule
clock will appear indicating the schedule is active. To run the
schedule when the
restart your slideshow and then press
Schedule
2. The DPF will go into stand-by mode according to the schedule,
and when it resumes operation, the slideshow will again begin
to play.

Run Schedule from CALENDAR/CLOCK Screen

CALENDAR/CLOCK
1. On the
2. Select
Run Schedule
the schedule is active, and then the DPF will operate according to
the set schedule.
3. The DPF will go into stand-by mode according to the schedule,
and when it resumes operation, the
again be displayed.
.
to return to previous screen.
function whenever you want the schedule
CALENDAR/CLOCK
intervention will cancel the activation (i.e., pressing
remote or control button, powering off) and the
schedule will not take effect until you select this function
again to re-activate.
button appears (approx 10 seconds). A small timer
Run Schedule
button appears again.
. A small timer clock will appear indicating
screen.
Run Schedule
when the
ENTER
button is no longer displayed,
ENTER
screen, press
MENU
Calendar/Clock
function, any user
Run
when the
Run
.
screen will
21