Pandigital PI8004W01 User Manual page 39

Get Claim Token 1
3. Select
displayed, which you will need in the next step.
4. On your PC:
Go to http://frameit.live.com/device/claim.aspx
the Claim Token, and then click
5. On the DPF:
FrameIt
On the
Registration Required
6. If applicable, repeat steps 3-5, selecting
to connect with your second FrameIt account.
Connect
7. Select
FrameIt status should change from
Setup Done
8. Proceed to step 2 in following View FrameIt RSS Feeds
instructions.
View FrameIt RSS Feeds
IMPORTANT: This step assumes that you have already
HOME
1. On the
Photo Sharing
2. On the
3. The RSS feed folders that you assigned on frameit.live.com
will be displayed; the titles will appear as you highlight the
folders. Press
folder.
Wait for the feed data to appear; the length of time it takes to
appear depends on the amount of feed data contained within
the selected folder. For instance, a folder that contains a
large number of photos will take substantially longer to
display than when you select News or Weather feeds.
TIP: If you make changes to your Windows Live FrameIt account
while your DPF is connected (i.e., create new collections),
the new feed data will not display until you disconnect and
re-connect with FrameIt.
. A new Claim Token will be
screen, be sure the
Registered
to
to display the
.
successfully connected the DPF with the Windows
Live FrameIt site per previous instructions.
screen, select
screen, select FrameIt.
ENTER
to display the contents of a highlighted
Continue
.
Status
changed from
.
Get Claim Token 2
Photo Sharing
Setup Required
Wi-Fi
.
to enter
screen. The
to
39