Digital Input Commands - Agilent Technologies 3499A Quick Reference Manual

Scan Configuration Commands
ARM
:SOURce <BUS|EXTernal|
:SOURce?
:COUNt < number >|MIN|
:COUNt? [MIN|MAX|INFinity]
:TIMer < seconds >|
:TIMer? [MINimum|MAXimum]
TRIGger
:SOURce <BUS|EXTernal|
:SOURce?
:TIMer < seconds >|
:TIMer? [MIN|MAX]
[ROUTe:]
[CHANnel:]DELay <
[CHANnel:]DELay? <
CONFigure
:EXTernal[:TRIGger]:SOURce <
:EXTernal[:TRIGger]:SOURce?
:EXTernal[:TRIGger][:OUTPut] < |1|
:EXTernal[:TRIGger][:OUTPut]?
State Storage Commands
*SAV < mem >
*RCL < mem >
SYSTem:STATe:DELete <

Digital Input Commands

SENSe:DIGital:DATA
:BIT? < bit_port >
BYTE
[:< |WORD|LWORD>][:VALue]? <
BYTE
[:< |WORD|LWORD>]:BLOCK? <
Digital Output Commands
SOURce:DIGital:DATA
:BIT < bit_port >,<0|1|POS|NEG>
[:< BYTE |WORD|LWORD>][:VALue] <
BYTE
[:< |WORD|LWORD>]:BLOCK <
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
IMMediate |TIMer|MIX|HOLD>
MAX |INFinity
MIN
|MAX
IMMediate |TIMer|MIX|HOLD>
MIN
|MAX
seconds >,< channel_list
channel_list >
slot >
0 OFF |ON>
Valid Memory Locations
01 - 10 (Rev 1.0, 2.0, 3.0)
01 - 50 (Rev 4.0)
mem >|ALL
port >
port >,< size
port >,< data
port >,< block_data
4
>|ALL
>
>
>