Option Setting - Panasonic NV-HV60 Series Operating Instructions Manual

Option Setting

MENU
CLOCK SET
TUNER PRESET
SYSTEM
OPTION
SELECT : , OK
END :MENU
1 Press [MENU] (7) to display the Main menu on the TV
screen.
2 Press [Cursor] (37) (34) to select [OPTION] then
press [OK] (23).
3 Press [Cursor] (37) (34) to select the desired field.
TAPE SELECT:
• Press [Cursor] (37) (21) to select the corresponding
video cassette tape length.
AUTO: The VCR automatically distinguishes E30, -60, -90,
-120, -180 and -240 tapes.
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
• The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT: To select the colour TV system
• Press [Cursor] (37) (21) to select [AUTO].
Allows NTSC [4.43] or [3.58] signals to be distinguished
automatically.
• If the tape has not recorded correctly, select 4.43 or 3.58.
4.43: When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
• Some programmes on NTSC 3.58 system cannot be
recorded correctly at this position.
NTSC PB SELECT:
• Press [Cursor] (37) (21) to select the desired position
according to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43: For TVs that can receive NTSC 4.43 signals.
3.58: For TVs that can receive NTSC 3.58 signals.
JET NAVIGATOR:
• Press [Cursor] (37) (21) to select [ON] or [OFF].
OFF: Initially set at this position.
ON: Jet Navigator function works. If you select [ON],
[OSD REC] is set to [OFF] automatically.
OPTION
TAPE SELECT [AUTO]
NTSC INPUT SELECT [AUTO]
NTSC PB SELECT [onPALTV]
JET NAVIGATOR [OFF]
DELETE NAVIDATA [NO]
OSD REC [OFF]
OSD [AUTO]
MONAURAL [ON]
END :MENU
SELECT:
To select the corresponding video
cassette tape length to display the
approximate remaining tape time.
used to record NTSC signals.
To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
To set the conditions for the Jet
Navigator Function.
DELETE NAVIDATA:
• Press [Cursor] (37) (21) to select [OK] then press [OK]
(23) to do the deletion.
NO: Initially set at this position.
END: It is done to delete all the Jet Navigator data.
OSD REC:
• Press [Cursor] (37) (21) to select [ON] or [OFF].
OFF: Initially set at this position.
ON: This setting enables OSD Recording. (See page 14.)
If you select [ON], [JET NAVIGATOR] is set to [OFF]
automatically.
OSD:
• Press [Cursor] (37) (21) to select [AUTO] or [OFF].
AUTO: To make various indicators appear On Screen
Display for 5 seconds press [OSD] (35).
OFF: No indications appear.
MONAURAL:
• Press [Cursor] (37) (21) to select [ON] or [OFF].
ON: To record the normal sound during a NICAM
broadcast or if the stereo sound is distorted due to
inferior reception conditions.
OFF: Normally set at this position.
4 Press [MENU] (7) twice to exit the On Screen Display.
11
To delete all the Jet Navigator data
stored in the VCR memory.
To set the conditions for the OSD
Recording function.
To select the On Screen Display
mode.
To select the sound mode.
(For NV-HV60GN only)