Option Setting - Panasonic NV-SJ230AM Operating Instructions Manual

Option Setting

1 Press the MENU button
the Main menu on the TV screen.
2 Press the Cursor buttons (34)
to select [OPTION] then press the
OK button .
3 Press the Cursor buttons (34)
to select the desired field.
TAPE SELECT:
– Press the Cursor buttons (21)
corresponding video cassette tape length.
AUTO: The VCR automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
E195: For E195 tape
E260: For E260 tape
E300: For E300 tape
– The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT: To select the colour TV system
– Press the Cursor buttons (21)
Allows NTSC [4.43] or [3.58] signals to be distinguished
automatically.
– If the tape has not recorded correctly,
select 4.43 or 3.58.
4.43: When recording NTSC 4.43 signals.
3.58: When recording NTSC 3.58 signals.
Some programmes on NTSC 3.58 system
cannot be recorded correctly at this position.
NTSC PB SELECT:
– Press the Cursor buttons (21)
position according to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43: For TVs that can receive NTSC 4.43
signals.
3.58: For TVs that can receive NTSC 3.58
signals.
JET NAVIGATOR:
– Press the Cursor buttons (21)
[OFF].
OFF: Initially set at this position.
ON: [ ] appears on the VCR display and Jet
Navigator function works.
If you select [ON], [OSD REC] is set to [OFF]
automatically.
to display
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
SYSTEM
OPTION
SELECT : , OK
END :MENU
OPTION
TAPE SELECT
NTSC INPUT SELECT
NTSC PB SELECT
JET NAVIGATOR
DELETE NAVIDATA
OSD REC
DIRECT REC
END :MENU
SELECT:
To select the corresponding video
cassette tape length to display the
approximate remaining tape time.
to select the
used to record NTSC signals.
to select [AUTO].
To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
to select the desired
To set to the conditions for the Jet
Navigator Function.
to select [ON] or
DELETE NAVIDATA:
– Press the Cursor buttons (21)
press the OK button
NO: Initially set at this position.
END: It is done to delete all the Jet Navigator data.
OSD REC:
– Press the Cursor buttons (21)
[OFF].
AUTO
[ ]
[ AUTO ]
onPALTV
[ ]
[ OFF ]
NO
[ ]
OFF: Initially set at this position.
[ OFF ]
OFF
[ ]
ON: This setting enables OSD Recording.
(See page 14.)
If you select [ON], [JET NAVIGATOR] is set to
[OFF] automatically.
DIRECT REC:
– Press the Cursor buttons (21)
[OFF].
OFF: Initially set at this position.
ON: This setting enables Direct TV Recording.
AV Input becomes exclusive channel for Direct
TV Recording.
(See page 15.)
4 Press the MENU button
Display.
To delete all the Jet Navigator
data stored in the VCR's memory.
to select [OK] then
to do the deletion.
To set to the conditions for the
OSD Recording function.
to select [ON] or
To set to the conditions for Direct
TV Recording Function.
to select [ON] or
twice to exit the On Screen
11