Table of Contents
Advertisement
Option Setting
1 Press the MENU button
display the Main menu on the TV
screen.
2 Press the Cursor buttons (34)
to select [OPTION] then press the
OK button
.
3 Press the Cursor buttons (34)
to select the desired field.
TAPE SELECT:
– Press the Cursor buttons (21)
corresponding video cassette tape length.
AUTO: The VCR automatically distinguishes E30, -60,
-90, -120, -180 and -240 tapes.
E195:
For E195 tape
E260:
For E260 tape
E300:
For E300 tape
– The remaining tape time may not be displayed correctly
depending on the tape used.
NTSC INPUT SELECT: To select the colour TV system
– Press the Cursor buttons (21)
Allows NTSC [4.43] or [3.58] signals to be distinguished
automatically.
– If the tape has not recorded correctly, select 4.43 or
3.58.
4.43:
When recording NTSC 4.43 signals.
3.58:
When recording NTSC 3.58 signals.
Some programmes on NTSC 3.58 system
cannot be recorded correctly at this position.
NTSC PB SELECT:
– Press the Cursor buttons (21)
position according to the colour TV system of the TV.
on PAL TV: For TVs that can receive PAL signals.
4.43:
For TVs that can receive NTSC 4.43
signals.
3.58:
For TVs that can receive NTSC 3.58
signals.
JET NAVIGATOR:
– Press the Cursor buttons (21)
[OFF].
OFF:
Initially set at this position.
ON:
appears on the VCR display and Jet
Navigator function works.
On Screen Display
to
MENU
LANGUAGE
CLOCK SET
TUNER PRESET
CH ADD&DELETE
G-CODE CH SET
SYSTEM
OPTION
SELECT
:
, OK
END
:MENU
OPTION
TAPE SELECT
NTSC INPUT SELECT
NTSC PB SELECT
JET NAVIGATOR
DELETE NAVIDATA
DIRECT REC
END :MENU
SELECT:
To select the corresponding
video cassette tape length to
display the approximaste
remaining tape time.
to select the
used to record NTSC signals.
to select [AUTO].
To select the colour TV system of
the TV used to play back a tape
recording NTSC signals.
to select the desired
To set to the conditions for the Jet
Navigator Function.
to select [ON] or
DELETE NAVIDATA:
– Press the Cursor buttons (21)
press the OK button
NO:
Initially set at this position.
END:
It is done to delete all the Jet Navigator data.
DIRECT REC:
– Press the Cursor buttons (21)
[OFF].
AUTO
[
]
[
AUTO
]
[
onPALTV
]
OFF:
Initially set at this position.
OFF
[
]
[
NO
]
[
OFF
]
ON:
This setting enables Direct Recording.
AV Input (A1) becomes exclusive channel for
Direct Recording.
(See page 17.)
4 Press the MENU button
Display.
To delete all the Jet Navigator
data stored in the VCR's memory.
to select [OK] then
to do the deletion.
To set to the conditions for Direct
Recording Function.
to select [ON] or
twice to exit the On Screen
13
Advertisement
Table of Contents
