O Card - Panasonic HD1700pe Operating Instructions Manual

Function menus
<CARD>
The settings and information can be saved onto or
loaded from the IC card memory. When
is pressed on the <MENU> screen while the
is held down, the function menu shown below is
displayed.
[MENU/ERROR LOG/MULTI CUE]
Memory name
Memory selection
cursor
SHIFT F1 F2 F3
Warning message 1
SYSTEM MENU/SETUP MENU/50PIN ASSIGN
File title (CARD)
File number File number
(VTR) (CARD)
SHIFT F1 F2 F3
File status (CARD) File status (VTR)
Warning message 2
MULTI CUE
SHIFT F1 F2 F3
ERROR LOG
SHIFT F1 F2 F3
<Notes>
• IC cards are not compatible with other VTR models.
• The IC cards which can be used are the 68-pin two-
piece type of SRAM cards (64KB or more) with
replaceable battery. Model number BN-064HSR is
recommended.
(CARD)
F2
button
F
F4 F5 F6
File title (VTR)
F4 F5 F6
F4 F5 F6
F4 F5 F6
Warning message 1
Warnings concerning the IC card are displayed here.
NO CARD
The IC card has not been inserted.
UNFORMATTED CARD
The IC card is not formatted.
HD150 FORMAT!
This card was formatted by the AJ-HD150.
HD1500 FORMAT!
This card was formatted by the AJ-HD1500.
Warning message 2
BATTERY!
This appears when the battery inside the IC card has
no charge left. It signifies that it is time to replace the
battery.
PROTECT!
The IC card protection is set to ON.
File status
File status (CARD)
Blank No storage files are present.
Storage files are present.
≤
(Unlocked status)
Storage files are present.
µ
(Locked status)
CARD
File status (VTR)
- - - - -
The target file is in the
unlocked status.
The target file is in the
locked status.
69