Checking Of Main C.b.a; Flat Card Cable Installation; Removal Of Cassette Tape - Panasonic NV-SJ220EG Service Manual

2.1.3. CHECKING OF MAIN C.B.A.

When servicing the MAIN C.B.A., take out the MAIN C.B.A. and mechanism from the frame and turn over.

2.1.4. FLAT CARD CABLE INSTALLATION

When installing the Flat Card Cable on the connector, install the Flat Card Cable with the cable contacts
facing the connector contacts.

2.2. REMOVAL OF CASSETTE TAPE

There are 2 ways to remove a cassette tape.
1. Service Information Display Operation
A. Press the FF and EJECT keys simultaneosly for 3 seconds and set the Service Mode 7.
B. Press STOP key in order to rotate the Loading Motor for unloading operation. (Pay an attention of tape slack)
2. Manual Operation
A. Disconnect the AC Mains Lead and remove the Top Panel.
B. Rotate the Main Cam Gear clockwise until the Loading Posts move to fully unloaded position as shown in Fig.S10.
(Tape is remaining)
http://cxema.ru
Fig. S8
Fig. S9
Fig. S10