Time Switch Program 1; Preselection Of Weekday For Time Switch Program 1 - Siemens RVA63.242 User Manual

Benefits
Description
Description
Setting
Important
Effect
Entry of 1-7
Entry of 1...7
48/218
Siemens Building Technologies
Landis & Staefa Division

Time switch program 1

The heating system operates only if there is demand for heat.
The user can set the heating periods to suit his lifestyle.
Energy can be saved by making adequate use of the heating program.
The time switch program consists of the switching times to be entered for the weekdays
or the 7-day block. The controller has 3 time switch programs that function
independently of one another.
Time switch program 1 is always used with heating circuit 1.
3.10 Preselection of weekday for time switch
program 1
This is a preselection of the weekdays or of the 7-day block to set the switching times
for time switch program 1.
The heating program thus set becomes active when selecting automatic mode
Setting range
1-7
1...7
This setting must be made before the switching times are entered!
For every day on which other switching times shall apply, preselection of the individual
day with subsequent entry of the switching times must be repeated.
This setting is used to select either the whole week (1-7) or individual days (1...7).
7-day block
Entry of the switching times from line 6 to 11 is identical for every day from Monday
through Sunday.
Example:
Mo
...
So
0 2 4
Switching time for nominal setpoint
Switching time for reduced setpoint
Individual days
The setting of the switching times from line 6 through 11 is entered only for the
individual day selected here.
è
Tip
First, choose the 7-day block (1-7) to enter the switching times that apply to the
majority of days; then, select the individual days (1...7) to make the required
adjustments.
Basic Documentation RVA63.242, RVA53.242
Description of end-user settings
Unit
7-day block
Individual days
6 8 10 12 14
2373Z11
16 18 20 22 24 h
CE1P2373E
26.03.2001
.