Fan - HP 242 G2 Maintenance And Service Manual

Fan

Description
Fan (includes cable)
Before removing the fan, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Hard drive (see
b. Memory module service cover (see
c. Optical drive (see
d. Keyboard (see
e. Top cover (see
Remove the fan:
1. Close the computer.
2. Turn the computer upside down, with the front toward you.
3. Disconnect the fan cable from the system board.
4. Turn the computer right side up, with the front toward you.
56 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
Battery on page 33) and then remove the following components:
Hard drive on page 34)
Memory module on page
Optical drive on page 42)
Keyboard on page 46)
Top cover on page 49)
Spare part number
718430-001
40)