Xerox 7800 User Manual page 277

3. Push the stapler to the right as shown.
4. Grip the staple cartridge by the orange handle and pull it firmly toward you to remove it.
5. Remove any loose staples or other debris from inside the finisher.
6. Pull the staple cartridge clamp firmly in the direction shown to open it.
7. Remove the jammed staples (1), then push the clamp in the direction shown until it snaps into the
locked position (2).
WARNING:
The points of the jammed staples are sharp. Remove the jammed staples carefully.
® ®
Xerox WorkCentre 7800/7800i Series Color Multifunction Printer
Troubleshooting
277
User Guide