Cleaner Assembly - Hoover fh50800 Owner's Manual

Carton Contents
A. Handle
B. Body
C. Clean Water Tank
D. Hose
E. Upholstery Tool
F. Handle Locking Pin
G. Hoover Deep Cleaning Solution
H. Float Chamber Filter
Remove all parts from carton and identify each item
shown.
Make sure all parts are located before disposing of
packing materials.
Accessories not included with your model may be
purchased separately by visiting www.hoover.com.
attaCH Handle
1.2 Locate orange lock-
ing pin and press in
points shown to remove.
1.3 Insert handle and
re-fit locking pin.
1.4 Locking pin will
'click' when in place.
tool CaddY and Hose
1.5 Locate orange locking tabs on the back of
cleaner and ensure they are horizontal. Attach
caddy to unit top first.
1.6 Rotate tabs 90° clockwise to lock caddy onto unit.
1.7 Connect Upholstery Tool to hose by sliding onto
the connector until it locks securely.
1.8 Fit hose connector end in first.
1.9 Wrap hose around
caddy tightly anti-
clockwise.
Clip in the last wrap of
the hose and Upholstery
Tool as shown.

1. Cleaner asseMblY

1.2
1.7
2.1
A
b
C
1.3
1.5
1.8
5
H
G
F
e
d
1.4
1.6
1.9