Cleaner Assembly - Hoover MAX Extract Owner's Manual

1. Cleaner asseMblY

CartOn COntents
1.1
A. Base, Hose and Removable Dirty
Water Tank
B. Upper Handle
C. Handle Bolt (located in handle of unit)
D. SpinScrub 60 Brush Assembly or
®
SpinScrub 77 Brush Assembly
®
(Assembled on unit)
E. Stair/Upholstery Nozzle
(Assembled on unit)
F. SpinScrub Hand Tool*
®
G. Clean Water Tank/ Carry
Handle
H. Squeegee* (Assembled on unit)
I. Solution Bottle
Remove all parts from carton and
identify each item shown.
Make sure all parts are located before
disposing of packing materials.
*Available on select models only. Accessories not included with your
model may be purchased separately by visiting hoover.com.
NOTE: Phillips screwdriver needed for assembly.
attaCH Handle
1.2
Handle ships with
bolt screwed in place.
Remove bolt.
1.2 Insert handle section
into vacuum base. Push
down firmly.
1.3 Insert bolt. Tighten
with screwdriver.
upper tank
1.4 Position bottom of tank onto cleaner.
1.5 Push upper part of tank to lock it into place.
stOre HOse
1.6
1.6 Wrap hose around
back of cleaner. Store
hose handle in holster.
b
C Carpet Bare
Upholstery floor Pre-
E
Cleaner
cleaner Cleaner
A
D
F*
G
H*
1.3
1.4 1.5
COrd stOraGe
1.7
1.7 Wrap cord around
cord hooks for convenient
storage. Attach the plug
end to cord.
5 Actual model may vary from images shown.
I