Service; Cleaning Products - Hoover fh50800 Owner's Manual

probleM possible Cause
Cleaner won't 1. Clean Water Solution Tank not
installed properly.
dispense
2. Needs service.
Cleaner 1. Hose is clogged.
attachments
2. Hose inlet clogged.
won't pick up
3. Dirty Water Tank is full.
To obtain approved Hoover
Warranty Service Dealer (Depot) by:
• Checking the Yellow Pages under "Vacuum Cleaners" or "Household".
• Visit our website at hoover.com (U.S. Customers) or hoover.ca (Canadian customers).
Follow the service center link to find the service outlet nearest you.
• For an automated referral of authorized service outlet locations call 1-800-944-9200.
Do not send your vacuum to Hoover
If you need further assistance:
To speak with a customer service representative call 1-800-944-9200; Mon-Fri 8am-7pm EST.
Always identify your vacuum by the complete model number when requesting information or ordering parts.
(The model number appears on the bottom of the vacuum.)
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
WARNING:
To reduce the risk of fire and electric shock due to internal component damage, use only Hoover
products intended for use with the appliance as noted below:
Hoover ® deep Cleansing

5. serviCe

®
service and genuine Hoover
®
, Inc., Company in Glenwillow for service. This will only result in delay.

6. CleaninG produCts

possible solution
1. Review Clean Water Solution Tank
Installation - Pg. 8.
2. Take to service center. To find nearest
location, visit our website at www.hoover.com
or call 1-800-944-9200.
1. Remove hose and tools; remove obstruction.
2. Remove hose and clean inlet - Pg. 9.
3. Empty Dirty Water Tank - Pg. 10.
®
parts, locate the nearest Authorized Hoover
13
®
®
cleaning