Cleaner Assembly; Carton Contents - Hoover uh70085 Owner's Manual

1. CLEANER ASSEMBLY

Carton contents

1-1 A
D
C
Attach handle
1-2 1-3
A
Using a Phillips screwdriver, remove (2) screws from the top of
the upper housing assembly.
Insert handle section (A) into upper housing assembly. Push down
firmly until you hear a click.
Fasten (2) screws on either side of handle base.
Position Tools
Place smaller diameter
1-5
end of wand (A) into
bottom of rack. Snap
B
wand into clip at top.
C Repeat with other wand.
Crevice tool (B) fits into
A
wands.
Fit Upholstery tool (C)
into storage area on side
of cleaner as shown.
A. Handle section
B. Cleaner base and upper housing assembly
C. Cleaning tools and wands*
D. Powered Hand Tool
Remove all parts from carton and identify each
B
item shown.
Make sure all parts are located before disposing of
packing materials.
*Tools may vary per model.
1-4
Fit powered hand tool (A)
A
1-6
into recessed area on front
of cleaner. Pivot toward
handle to snap in place.
4