Replacing The Remote Control Battery - ViewSonic LS810 User Manual

Replacing the remote control battery

1. To open the battery cover, place the remote control with the backside facing upwards.
Press down at the indicated area and then pull the battery lid upwards along the indi-
cated direction.
2. Take out the old batteries (if required) and then place 2 AAA batteries according to
the indicated orientation. The positive pole of the battery should be directed at the (+)
direction while the negative pole should be directed at the direction.
3. Align the battery lid with the bottom part of the remote control and push downwards.
Return the lid to its original position to complete the process.
Warning
• Avoid placing the remote control and battery in hot and humid environments such as kitchens, bathrooms,
saunas, tanning rooms, or within vehicles.
• Replace batteries only with the same or equivalent type of batteries recommended by the battery
manufacturer.
• Refer to the manufacturer's instructions and local environmental regulations to dispose of old batteries.
• Do not throw batteries into fires. There may be danger of an explosion.
• If the battery is flat or if you will not be using the remote control for a while, remove the battery to prevent
battery leaks from damaging the remote control.
11