Table of Contents
Advertisement
Remote Control - Effective Range
To ensure proper function of the remote control follow the steps below:
1. The remote control must be held at an angle within 30° perpendicular to the
projector's IR remote control sensor(s).
2. The distance between the remote control and the sensor(s) should not exceed
8 m (26 ft.)
Remote Control - Replacing the Batteries
1. To open the battery cover, turn the remote control over to view its back, open
the cover in the direction of the arrow.
2. Remove any existing batteries (if necessary) and install two (2) AAA batteries
observing the battery polarities as indicated in the base of the battery
compartment. Positive (+) goes to positive and negative (-) goes to negative.
3. Replace the battery tray by aligning it with the base and pushing it back into
position.
NOTE:
• Avoid leaving the remote control and batteries in excessive heat or a humid
environment.
• Replace only with the same or equivalent type recommended by the
battery manufacturer.
• If the battery is drained or if you will not be using the remote control for
an extended period of time, remove the battery to avoid damage to the
remote control.
• Dispose of used batteries according to the manufacturer's instructions and
local environment regulations for your region.
12
Advertisement
Table of Contents
