ViewSonic LS810 User Manual page 51

FUNCTION
Audio Settings
Presentation Timer
Pattern
Blank Timer
Message
Splash Screen
Screen Capture
My buttons
3D Settings
HDMI Settings
Audio Settings
LAN Control Settings
Light Source Settings
DCR
See "Adjusting the sound"
See "Setting the presentation timer"
The projector can display several test patterns. It helps
you adjust the image size and focus and check that the
projected image is free from distortion.
See "Hiding the image"
Selecting On displays the current information on the
screen when the projector is detecting or searching for
a signal.
Allows you to select which logo screen will be displayed
during projector start-up.
See "Creating your own startup screen"
Sets a hotkey on remote control.
See "Using the 3D functions"
See "Changing HDMI input settings"
See "Adjusting the sound"
See "Controlling the projector through a LAN
environment" for details.
Light Source Mode
See "Setting Light Source Mode"
Light Source Hours
See "Getting to know the Light Source hour"
on how the total Light Source hour is calculated.
Enables or disables the DCR (Dynamic Contrast Ratio)
function. Selecting On enables the function and the
projector will automatically switch the Light Source
mode between normal and economic modes according
to the input image detected.
This function is only available when a PC input signal is
selected.
After enabling DCR, frequent Light Source mode
switching may shorten Light Source life and noise level
will vary during operation.
44
Description
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details