Draytek Vigor2912 User Manual page 74

I I . C o n
I I . C o n
After finished the WAN settings for IPv6, please configure the LAN settings to make the
router's client getting the IPv6 address.
1. Access into the web user interface of Viogr2925. Open LAN>> General Setup. Click
the IPv6 button.
Note: Only the subnet of LAN1 supports IPv6 feature.
2. In the field of RADVD Configuration, the default setting is Enable. The client's PC
will ask RADVD service for the Prefix of IPv6 address automatically, and generate an
Interface ID by itself to compose a full and unique IPv6 address.
3. In the field of HCPv6 Server Configuration, when DHCPv6 service is enabled, you can
assign available IPv6 address for the client manually.
Note: When both mechanisms are enabled, the client can determine which mechanism
to be used (e.g., the default mechanism for Windows7 is RADVD).
Vigor2912 Series User's Guide
f i g u r i n g t h e L A N S
f i g u r i n g t h e L A N S
e t t i n g s
e t t i n g s
64