Draytek Vigor2912 User Manual page 167

S t a t i c R o u t e f o r I P
S t a t i c R o u t e f o r I P
You can set up to 40 profiles for IPv6 static route. Click the IPv6 tab to open the following
page:
Each item is explained as follows:
Item
Set to Factory Default
Viewing IPv6 Routing
Table
Index
Destination Address
Status
Click any underline of index number to get the following page.
Available settings are explained as follows:
Item
Enable
v 6
v 6
Description
Clear all of the settings and return to factory default
settings.
Displays the routing table for your reference.
The number (1 to 40) under Index allows you to open next
page to set up static route.
Displays the destination address of the static route.
Displays the status of the static route.
Description
Check it to enable this profile.
157
Vigor2912 Series User's Guide