Draytek Vigor2912 User Manual page 180

To use Wizard Mode, simple do the following steps:
1. Click the Wizard Mode radio button.
2. Click any Index number link (e.g., 1 in this case). The setting page will appear as follows:
Available settings are explained as follows:
Item
Source IP
Destination IP
3. Click Next to get the following page.
Available settings are explained as follows:
Item
Interface
Vigor2912 Series User's Guide
Description
Any – Any IP can be treated as the source IP.
Src IP Start - Type the source IP start for the specified
WAN interface.
Src IP End - Type the source IP end for the specified
WAN interface. If this field is blank, it means that all the
source IPs inside the LAN will be passed through the WAN
interface.
Any – Any IP can be treated as the destination IP.
Dest IP Start- Type the destination IP start for the
specified WAN interface.
Dest IP End - Type the destination IP end for the specified
WAN interface. If this field is blank, it means that all the
destination IPs will be passed through the WAN interface.
Description
Use the drop down list to choose a WAN or LAN interface
or VPN profile. Packets match with the above criteria will
be transferred to the interface chosen here.
170