Draytek Vigor2912 User Manual page 141

4 . 1 . 3 . 1 0 D e t a i l s P a
4 . 1 . 3 . 1 0 D e t a i l s P a
DHCPv6 client mode would use DHCPv6 protocol to obtain IPv6 address from server.
Available settings are explained as follows:
Item
Identify Association
IAID
WAN Connection
Detection
Bridge Mode
g e f o r I P v 6 – D H C
g e f o r I P v 6 – D H C
Description
Choose Prefix Delegation or Non-temporary Address as
the identify association.
Type a number as IAID.
Such function allows you to verify whether network
connection is alive or not through NS Detect or Ping Detect.
Mode – Choose Always On, Ping Detect or NS Detect for
the system to execute for WAN detection. With NS Detect
mode, the system will check if network connection is
established or not, like IPv4 ARP Detect. Always On
means no detection will be executed. The network
connection will be on always.

Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.

TTL (Time to Live) –If you choose Ping Detect as
detection mode, you have to type TTL value.
Enable Bridge Mode - If the function is enabled, the router
will work as a bridge modem.
Enable Firewall – It is available when Bridge Mode is
enabled. When both Bridge Mode and Firewall check boxes
are enabled, the settings configured (user profiles) under
131
P v 6 C l i e n t i n W A N
P v 6 C l i e n t i n W A N
1 / W A N 2
1 / W A N 2
Vigor2912 Series User's Guide