Connection
4.6 Connecting the Interface Module to a CM IM DP ECOFAST Cu Connection Module
Pin assignment of the ECOFAST cable connector
View of the ECOFAST cable connector
Note
The cable shield support is described in the Hardware Installation Instructions for the
ECOFAST cable connector.
88
Terminal
Assignment X01 and X02
Feed for X01
A
PROFIBUS DP signal A
B
PROFIBUS DP signal B
1
1L+ electronics/encoder supply
2
Ground for electronics/encoder supply 1M
3
Ground for load voltage supply 2M
4
2L+ load voltage supply
Forwarding X02
A
PROFIBUS DP signal A
B
PROFIBUS DP signal B
1
1L+ electronics/encoder supply
2
Ground for electronics/encoder supply 1M
3
Ground for load voltage supply 2M
4
2L+ load voltage supply
Operating Instructions, 03/2013, A5E00335544-08
ET 200pro distributed I/O system