Canceling Registration/Re-Registration; Canceling The Handset Registration; Re-Registering The Handset - Panasonic KX-TG6500 Operating Instructions Manual

5.8 ghz expandable cordless phone system, pulse-or-tone dialing capability
Hide thumbs Also See for KX-TG6500:
Table of Contents

Advertisement

Canceling Registration/Re-registration

Canceling the Handset Registration

If you no longer need to use the handset or if you want to use the handset with a
different base unit of the same model, it is necessary to cancel the handset's
registration from the current base unit.
Only one handset can be canceled at a time.
Make sure the handset and the base unit near each other and are not being
used.
1
Press [MENU].
2
Scroll to "Initial setting" by pressing
[d] or [B], then press the soft key (
3
Scroll to "Registration" by pressing [d]
or [B], then press the soft key (
4
Scroll to "Deregistration" by pressing
[d] or [B], then press the soft key (
5
Press [3][3][5] to delete the registration
memory.
• If you enter a wrong code, re-enter [3][3][5].
6
Press the soft key (
• The registration memory will be erased on both
the handset and the base unit.
• If the handset beeps 3 times, you entered a
wrong code. Enter "335", then press the soft key
(
).
O K
• To register the handset to another base unit of
the same model, start from step 5 on page 91.
• "[-]" is shown on the top right of the display.
• After canceling registration, the handset cannot be used. If you want to use it
again, register the handset to the base unit by performing steps 5 and 6 on
page 91.

Re-registering the Handset

If you want to re-register the handset to the base unit or a different base unit of the
same model, you need to register it to that base unit. The handset will be given a
new extension number of that base unit. Only one handset can be registered at a
time near the base unit.
Make sure the base unit and the other handsets are not being used. Have
both the handset and base unit nearby during registration.
90
SELECT
SELECT
SELECT
).
O K
Handset & Base Unit
Handset
Initial setting
).
Registration
).
Deregistration
).
Deregistration
Enter code:335
Ex. Extension number 2
SPIPRIVACY1
IN USE
Handset [2]
Deregistered
:335
[-]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents