Yamaha xvs650 Supplementary Service Manual page 44

FRONT FORK
1. Install:
S Damper rod 1
S Rebound spring
S Oil lock piece 2
S Inner tube 3
CAUTION:
Allow the damper rod to slide slowly down
the inner tube until it protrudes from the bot-
tom, being careful not to damage the inner
tube.
2. Lubricate:
S Inner tube (outer surface)
Recommended oil:
Fork oil 10W or equivalent
3. Install:
S Inner tube 1
(to outer tube 2 )
4. Install:
S Gasket 1
New
S Damper rod bolt 2
5. Tighten:
S Damper rod bolt 1
NOTE:
Apply LOCTITE to the threads of the damper
rod holder. Tighten the damper rod bolt while
holding the damper rod with a T-handle 2 and a
damper rod holder 3 .
T-handle: 90890-01326
Damper rod holder: 90890-01388
–36–
CHAS
30 Nm (3.0 mSkg)